Selection And Use Of Self-locking Stainless Steel Cable Ties
Publish Time: Author: Site Editor Visit: 150
1. Stainless Steel Cable Tie selection method:
1. First, confirm the working conditions of the objects you tie, whether it is a highly corrosive environment or an ordinary natural environment, and choose a certain material;
2. Confirm the requirements of the objects you tie, whether it requires a very tight fit, or just a normal tightening, whether it is hard-hard, hard-soft or soft-soft tightening, and determine different styles of cable ties, such as rolled stainless steel cable ties, plastic-coated stainless steel cable ties, format stainless steel cable ties, beads, coatings, etc.;
3. Determine the brand. First, you must meet your own requirements and choose the brand with the best cost performance. It is not the more expensive the better, nor the cheaper the better. The more expensive the quality may be guaranteed, but there may also be more water. The cheaper is not necessarily the better. The raw materials of some cable ties are cheaper than the products. Obviously, the manufacturer may cut corners.
2. How to use self-locking stainless steel cable ties
1. Place the stainless steel cable tie in the opening groove between the blade and the rotating shaft;
2. Move the gear handle back and forth to tighten the stainless steel strap;
3. Push the handle forward, pull the knife handle downward, cut off the strapping tape, lock the buckle, and remove the tool.
